Thermoset Plastics 270

About
Thermoset Plastics 270 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for coating. Typical application of Thermoset Plastics 270: Coating Applications&&

Product Description
Supplier	Lord
Generic	环氧树脂
Material Status	Commercial: Active
Features	Thixotropic
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	1.16	g/cm³	ASTM D1895

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100 按容量计算的混合比: 3.5
Hardening method	按重量计算的混合比: 25 按容量计算的混合比: 1.0
stripping time
25℃	720 to 960	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	89		ASTM D2240
tensile strength
yield	65.5	MPa	ASTM D638
bending strength
yield	109	MPa	ASTM D790
compressive strength	93.1	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.