GERMADUR N - SOLIAO

About
GERMADUR N is a Polybutylene Terephthalate (PBT) material. It is available in Europe.&&

Product Description
Generic	polybutylene terephthalate
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ISO 1183
Melt Volume Rate
250℃，2.16 kg	50.0	cm³/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2500	MPa	ISO 527-2
tensile strength
yield	55.0	MPa	ISO 527-2
Tensile strain
fracture	4.0	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	7.0	kJ/m²	ISO 179
Charpy Unnotch Impact strength	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Melting temperature	223	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.