| About |
|---|
| ABLEBOND® 967-1™ adhesive is designed for applications which require lower-than-normal cure temperatures. It is ideal for application by automatic dispenser, screen printing, or hand probe.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Conductive |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| Electrical performance | Nominal value | Unit | Test method |
| Volume resistivity | |||
| — | 0.015 | ohms·cm | |
| — | 2.0E-3 | ohms·cm | |
| — | 5.0E-4 | ohms·cm | |
| — | 2.0E-4 | ohms·cm | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Brookfield viscosity | |||
| CP51，25℃ | 14.0 | Pa·s |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Chloride ion | |||
| 100℃ | 75 | ppm | |
| Ionic Potassium（100℃） | None detected | ||
| Ionic Sodium（100℃） | 5 | ppm | |
| lap shear strength | |||
| Al to Al，25℃ | 8.27 | MPa | |
| Mixing ratio | |||
| Part A：Part B | 1:1 | ||
| Shear strength – Die (Au to Au) | |||
| 25℃ | 22.8 | MPa | |
| 25℃ | 33.8 | MPa | |
| 25℃ | 30.0 | MPa | |
| 25℃ | 30.3 | MPa | |
| Heating reduction | |||
| 300℃ | 0.52 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | |||
| — | 75.0 | ℃ | |
| — | 110 | ℃ | |
| — | 135 | ℃ | |
| — | 145 | ℃ | |
| Thermosetting components | |||
| resin | |||
| Storage period | |||
| -40℃ | 52 | wk | |
| 25℃ | 26 | wk | |
| Post curing time | |||
| 65℃ | 6.0 | hr | |
| 80℃ | 2.0 | hr | |
| 120℃ | 0.50 | hr | |
| 150℃ | 0.25 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Cured at the Recommended Cure Schedule |
| 3. Cured at the Alternative Cure Schedule 1 |
| 4. Cured at the Alternative Cure Schedule 2 |
| 5. Cured at the Alternative Cure Schedule 3 |
| 6. Premixed & Frozen |
| 7. In kits |
| 8. Speed 5 rpm |
| 9. 2 X 2 mm die, Cured at the Alternative Cure Schedule 2 |
| 10. 2 X 2 mm die, Cured at the Alternative Cure Schedule 3 |
| 11. 2 X 2 mm die, Cured at the Recommended Cure Schedule |
| 12. 2 X 2 mm die, Cured at the Alternative Cure Schedule 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |