| About |
|---|
| Accura® e-Stone™ material is compatible with all intraoral and impression scanning systems that output an .stl file to produce accurate, durable models of individual teeth and arches with crisp resolution. Normal dental lab practices, including drilling, grinding and waxing, can be used with Accura® e-Stone™ material. Due to its high accuracy and repeatability, this material can also be used as a fit-check model for all-digital restorations. Applications Replacement for dental stone Crown and bridge restorations Orthodontic working and study models Features Durable Accurate Selection of color Digital production Benefits Compatible with standard dental lab practices Reduce breakage vs. plaster Decreased steps vs. impression based systems Increased visual detail for better margin viewing Reproducible & archivable for easy remakes&& |
| Product Description | |
|---|---|
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Durability |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.13 | g/cm³ | |
| — | 1.19 | g/cm³ | |
| viscosity | |||
| 30℃ | 0.2 to 0.3 | Pa·s | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 18 to 25 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 58.0 to 63.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 51.0 to 55.0 | ℃ | ASTM D648 |
| Glass transition temperature | 60.0 | ℃ | DMA |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Critical Exposure | 10.5 | mJ/cm² | |
| Penetration depth | 106.7 | µm |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 80 | ||
| Tensile modulus | 1500 to 1750 | MPa | ASTM D638 |
| tensile strength | 37.0 to 39.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 10 to 23 | % | ASTM D638 |
| Bending modulus | 1350 to 1750 | MPa | ASTM D790 |
| bending strength | 54.0 to 59.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid, 25°C |
| 3. Solid, 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |