Ad-Tech Epoxy EC-425

About
Ad-Tech Epoxy EC-425 is an Epoxy; Epoxide (Epoxy) product. It can be processed by casting and is available in North America.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	casting

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	1.10	g/cm³	ASTM D1895
Shrinkage rate
MD	0.50	%	ASTM D955

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	25	ohms·cm	ASTM D257
Dielectric strength	19	kV/mm	ASTM D149

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100 按容量计算的混合比: 4.5
Hardening method	按重量计算的混合比: 20 按容量计算的混合比: 1.0
storage stability
25 ℃	30 to 45	min

Thermosetting mixed viscosity	Nominal value	Unit	Test method
25℃	550	cP	ASTM D2393
stripping time
25℃	4300 to 7200	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	80		ASTM D2240
Tensile modulus	2280	MPa	ASTM D638
tensile strength
fracture	42.6	MPa	ASTM D638
Tensile strain
yield	3.2	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790
compressive strength	67.1	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.