| About |
|---|
| ALCOM® MED PS 1000 04004 is a General Purpose Polystyrene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of ALCOM® MED PS 1000 04004 include medical/healthcare and packaging. Characteristics include: RoHS Compliant Good Processability Low to No Odor/Taste Stabilized&& |
| Product Description | |
|---|---|
| Supplier | ALBIS |
| Generic | PS (GPPS) |
| Material Status | Commercial: Active |
| Features | Good liquidity,Low odor |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | |||
| 200℃，5 kg | 22.0 | cm³/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 3400 | MPa | ISO 527-2 |
| tensile strength | 36.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 1.1 | % | ISO 527-2 |
| Bending modulus | 3800 | MPa | ISO 178 |
| bending strength | 60.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 7.0 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| B50 | 85.0 | ℃ | ISO 306 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | |||
| Desiccant desiccant | 60 to 80 | °C | |
| Hot air dryer | 60 to 80 | °C | |
| Drying time | |||
| Desiccant desiccant | 2.0 to 3.0 | hr | |
| Hot air dryer | 2.0 to 3.0 | hr | |
| Processing (melt) temperature | 180 to 260 | °C | |
| Mold temperature | 10 to 70 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |