| About |
|---|
| ANYPOL EPS Resin is an expandable bead, which contains a blowing agent. According to the applications, it is divided into Self-extinguishable & General Purpose Grade and ANYPOL EPS Resin is an environmentally friendly product which it is possible to satisfy the customer’s requriements immediately for special grades since the Production Tehnology of ANYPOL EPS Resin has been developed by our own R&D. Properties: Short aging time Good molding process Short cycle time and good fusion Low thermal conductivity and good strength&& |
| Product Description | |
|---|---|
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Foaming performance,Self-extinguishing,Thermal conductivity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.0130 to 0.0170 | g/cm³ | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bead diameter | 1.18 to 1.60 | mm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |