| About |
|---|
| Artenius GLOBAL is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. It is suitable for stretch blow moulding in one or two stage processes, extrusion and film applications. Specially recommended for general uses in which the main requirement is the balance of optical and mechanical properties. It is particularly recommended for still or carbonated water, soft drinks, edible oil, food packaging and spirit drinks.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | > 1.39 | g/cm³ | |
| Apparent density | 0.84 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 80.0 to 84.0 | ml/g | ISO 1628 |
| Acetaldehyde | < 1.0 | ppm | ASTM F2013 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 84.0 | ASTM D6290 | |
| Crystallinity | > 48 | % | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.20 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 240 to 250 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 165 to 175 | °C | |
| Drying time | 5.0 to 6.0 | hr | |
| Melt temperature | 270 to 290 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |