Axiall PVC 5006 White

About
AXIALL’s Georgia Gulf 5006 White is a rigid PVC pellet compound designed for extrusion of rigid PVC house siding, window profiles and various contours where maximum weather resistance is required. Georgia Gulf 5006 White is widely used for window profiles and house siding. Twin screw extruded sheet and kick panels also are produced. USDA approval allows 5006 to be used for walk-in cooler walls, ruck panels and associated profiles. Single or twin screw machines may be used to convert Georgia Gulf 5006 White. It has been designed with excellent impact at ambient temperatures. The high flexural and tensile strength makes it highly suitable for structural installation. The extrusion flow characteristics are excellent, and complicated panel profiles are easily filled out, requiring a minimum of pull-down.&&

About

AXIALL’s Georgia Gulf 5006 White is a rigid PVC pellet compound designed for extrusion of rigid PVC house siding, window profiles and various contours where maximum weather resistance is required. Georgia Gulf 5006 White is widely used for window profiles and house siding. Twin screw extruded sheet and kick panels also are produced. USDA approval allows 5006 to be used for walk-in cooler walls, ruck panels and associated profiles. Single or twin screw machines may be used to convert Georgia Gulf 5006 White. It has been designed with excellent impact at ambient temperatures. The high flexural and tensile strength makes it highly suitable for structural installation. The extrusion flow characteristics are excellent, and complicated panel profiles are easily filled out, requiring a minimum of pull-down.&&

Product Description
Supplier	Axiall Corporation
Generic	PVC，刚硬
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,V-0
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³	ASTM D792
PVC unit classification	13464		ASTM D1784

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
3.2mm	130	J/m	ASTM D256
6.4mm	80	J/m	ASTM D256
Tensile impact strength	137	kJ/m²	ASTM D1822

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	69.0	℃	ASTM D648
Linear coefficient of thermal expansion
MD	6.5E-5	1/℃	ASTM D696

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	82		ASTM D2240
Tensile modulus	3100	MPa	ASTM D638
tensile strength
yield	49.0	MPa	ASTM D638
Bending modulus	3450	MPa	ASTM D790
bending strength	84.1	MPa	ASTM D790
Rockwell hardness
R-level	116		ASTM D785

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	185	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.