BR® 623P4 - SOLIAO

About
BR® 623P4 is a one-part epoxy material designed for use in insert or edge filling of honeycomb structures. It has been formulated to offer the benefit of low viscosity, making it especially suitable for hand filling of small cell size [1/8 inch (3.175 mm)] and deep section [> 1 inch (> 25.4 mm)] honeycomb core and for applications with automated pumping or dispensing equipment. The long working out-life of BR 623P4 at room temperature eliminates the need for cleaning out pumping equipment pipe work with solvent materials. The low cured density (0.70 g/cm² ) and high mechanical performance of BR 623P4 allows for excellent specific properties in honeycomb structures. The thixotropic nature of BR 623P4 ensures that there is no slump of the potting compound when used for edge filling of honey comb panels. Suggested Applications: Insert or edge filling of honeycomb structures&&

About

BR® 623P4 is a one-part epoxy material designed for use in insert or edge filling of honeycomb structures. It has been formulated to offer the benefit of low viscosity, making it especially suitable for hand filling of small cell size [1/8 inch (3.175 mm)] and deep section [> 1 inch (> 25.4 mm)] honeycomb core and for applications with automated pumping or dispensing equipment. The long working out-life of BR 623P4 at room temperature eliminates the need for cleaning out pumping equipment pipe work with solvent materials. The low cured density (0.70 g/cm² ) and high mechanical performance of BR 623P4 allows for excellent specific properties in honeycomb structures. The thixotropic nature of BR 623P4 ensures that there is no slump of the potting compound when used for edge filling of honey comb panels. Suggested Applications: Insert or edge filling of honeycomb structures&&

Product Description
Supplier	Cytec Industries
Generic	环氧树脂
Material Status	Commercial: Active
Features	Low smoke,Low Viscosity,Thixotropic,Low odor,Self-extinguishing,Low density
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.650 to 0.750	g/cm³

MECHANICAL	Nominal value	Unit
compressive strength
-55℃	66.0	MPa
23℃	53.0	MPa
80℃	42.0	MPa

Supplementary information	Nominal value	Unit	Test method
volatility	< 1.0	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.