CA1450 - SOLIAO

About

Product Description
Supplier	Wanhua
Generic	PC+ABS
Material Status	Commercial: Active
Features	Good Dimensional Stability

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1120	kg/m³	ASTM D792
Shrinkage rate
2mm	0.5-0.7	%	ASTM D955
Melt index
260℃；5kg	22	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
50mm/min	52	MPa	ASTM D638
Tensile modulus
1mm/min	2300	MPa	ASTM D638

50mm/min	≥ 50	%	ASTM D638
bending strength
2mm/min	80	MPa	ASTM D790
Bending modulus
2mm/min	2300	MPa	ASTM D790

50mm/min	40	MPa	ASTM D790

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.00E+15	ohms	ASTM D257
Volume resistivity	1.00E+16	ohms·cm	ASTM D257

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.82MPa，120℃/h	93	℃	ASTM D648
Vicat Softening Temp
50N，120℃/h	112	℃	ASTM D1525

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength
23℃	550	J/m	ASTM D256
-30℃	350	J/m	ASTM D256

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.55mm,3.0mm	HB		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.