CABELEC® CA4676

About
CABELEC CA4676 electrically conductive compound is based on conductive carbon black dispersed in a modified low density polyethylene resin. its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. Applications CABELEC CA4676 conductive compound has been specially designed for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary. examples of use are in handling of explosive powders, pigments and electronic components and it is particularly suitable for foam applications.&&

About

CABELEC CA4676 electrically conductive compound is based on conductive carbon black dispersed in a modified low density polyethylene resin. its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. Applications CABELEC CA4676 conductive compound has been specially designed for packaging and product handling applications where freedom from the hazard of electrostatic discharge is necessary. examples of use are in handling of explosive powders, pigments and electronic components and it is particularly suitable for foam applications.&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Conductive,Low density
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.990	g/cm³	Internal Method
Melt Flow Rate			ISO 1133
190℃，10.0kg	4.8	g/10min	ISO 1133
190℃，21.6kg	29	g/10min	ISO 1133
190℃，5.0kg	0.90	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	50		ASTM D2240
tensile strength
Fracture, 3 mm	13.0	MPa	ISO 527-2
Yield, 3 mm	11.0	MPa	ISO 527-2
Tensile strain
Fracture, 3 mm	390	%	ISO 527-2

Electrical performance	Nominal value	Unit	Test method
Surface resistivity
0.1 mm	2.5E+4	ohms	Internal Method
Volume resistivity
4.0 mm	10	ohms·cm	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	75	°C
Drying time	2.0 to 4.0	hr
Barrel 1 zone temperature	120 to 160	°C
Barrel 3 zone temperature	120 to 160	°C
Barrel 5 zone temperature	120 to 160	°C
Melt temperature	< 230	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.