About Ad-Tech Epoxy ES-211 is an Epoxy; Epoxide (Epoxy) product. It can be processed by coating and is available in North America. Applications of Ad-Tech Epoxy ES-211 include coating applications and tools. Characteristics include: Good Dimensional Stability Heat Resistant&& Product…

About HYSOL® ES1002™ is a two-component casting system with excellent handling properties. This low cost, flexible system is filled with a non-abrasive filler for machine metering/dispensing or regular hand mixer applications.&& Product Description Supplier Henkel Generic 环氧树脂 Material Status Commercial:…

About LOCTITE® PE 3142 forms a potting compound with high thermal conductivity when mixed with LOCTITE® PE 3160. This mixture forms a resilient, long work time, no blush potting compound with good surface finish and good bond strength to most…

About Bronze-filled epoxy for repairing, rebuilding, and maintaining bronze parts and equipment Intended Use: Repair, rebuild, and maintain marine propellers, shafts, trays, chutes, gate valves, and pump wear rings Product features: Resistant to chemicals and most acids, bases, solvents, and…

About EPO-TEK ® H24 is a two component, electrically and thermally conductive epoxy adhesive designed for semiconductor die attach and hybrid micro-electronics assembly.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Features Conductive,Low density,Thermal conductivity Availabilitys Africa & Middle East…

About Nordbak Castable Wear Compound是一种环氧; 环氧树脂产品,含有的填充物为碳化硅 和 陶瓷珠填料。 它,在北美洲有供货。 典型应用领域为:涂覆应用。 主要特性为:耐磨。&& Product Description Supplier Henkel Generic 环氧树脂 Material Status Commercial: Active Features Good wear resistance Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method Shore hardness Shaw’s D…

About Product description E-Pos 327H is a non diluted bisphenol A based epoxy resin with a relatively low viscosity. Applications E-Pos 327H is used at room temperature in combination with amine-based curing agents in the formulation of two-component reactive systems.…

About LOCTITE® PE 3141 Epoxy Resin is a resin formulated to offer improved long term performance at higher temperatures when mixed with LOCTITE® PE 3160 Epoxy Hardener. This mixture forms a resilient, long work time, no blush potting compound with…

About CONAPOXY FR-1830 is a ambient cure, two-component, low viscosity, flame retardant epoxy potting, casting, and coating system with excellent handling properties. CONAPOXY FR-1830 contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR-1830 is recognized to…

About BR® 623P4 is a one-part epoxy material designed for use in insert or edge filling of honeycomb structures. It has been formulated to offer the benefit of low viscosity, making it especially suitable for hand filling of small cell…

About Fixmaster Steel Stick是一种环氧; 环氧树脂产品,含有的填充物为钢填料。 它,在北美洲有供货。 Fixmaster Steel Stick的应用领域包括工业应用 和 修复材料。 主要特性为:耐化学品。&& Product Description Supplier Henkel Generic 环氧树脂 Material Status Commercial: Active Features Underwater Cure,Solvent resistance,Fast Cure Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test method Shore hardness…

About HYSOL® ES2202™ is an unfilled epoxy system with a high operating temperature and long pot life. It is recommended for use where excellent chemical resistance, high heat distortion temperature and good electrical properties under high humidity conditions are required.…

About CMET HS-690 is an Epoxy; Epoxide (Epoxy) material. It is available in Asia Pacific or North America for 3d printing, stereolithography.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Availabilitys North America,Asia Pacific Technical Data PHYSICAL Nominal value Unit…

About Acculam® Epoxyglas G10 nonFR – Laminate sheet comprised of a halogen free epoxy resin binder and a woven fiberglass substrate. It qualifies to NEMA G10 and MIL-I-24768 This material exhibits high mechanical strength and electrical insulating qualities under both…

About CYCOM® 7714A resin is a 250°F (121°C) curing epoxy resin with 160°F (71°C) wet service temperature capability. CYCOM 7714A is formulated for autoclave processing but has been successfully processed by press molding. Unidirectional tape and woven fabric impregnated with…

About EPO-TEK® H20E is a two component, 100% solids silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is also used extensively for thermal management applications due to its high thermal conductivity. It has proven…

About High Reliable and Easy-to-Use Molding Compounds for Various Type of Packages Strong Points Provide Various Molding Compounds with High Reliability to Cover Many Applications such as LSI, Transistors and Diodes. Good Curability and Applicable to Various Molding Machines (Both…

About EPO-TEK® 353ND-T4 is a two component, highly thixotropic epoxy with non-flowing properties and high temperature resistance. This is a higher viscosity version of EPO-TEK® 353ND-T for applications needing decreased flow.&& Product Description Generic 环氧树脂 Material Status Commercial: Active Features…

About Nordbak High Temp. Pneu Wear是一种环氧; 环氧树脂产品,含有的填充物为碳化硅 和 陶瓷珠填料。 它,在北美洲有供货。 典型应用领域为:涂覆应用。 特性包括: 耐磨 耐热&& Product Description Supplier Henkel Generic 环氧树脂 Material Status Commercial: Active Features High Heat Resistance,Good wear resistance Availabilitys North America Technical Data MECHANICAL Nominal value Unit Test…

About INSULCAST 3230 LV is a low viscosity, highly filled epoxy formulation which, in addition to having excellent electrical properties, has unusually high thermal conductivity with low thermal expansion. Similar to INSULCAST 140 but lower viscosity. This system meets the…