About SABIC® LDPE 2201H1 is a grade with a low level of anti block and a medium level of slip agent (E=erucamide). Blown Film: The grade has a very good draw down ability. Films based on 2201H1 combine toughness with…

About 24FS040 is a film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. It can be extruded with considerable ease on any conventional LDPE extruder. The polymer has been blended with necessary additives during manufacture to obtain…

About CABELEC CA4676 electrically conductive compound is based on conductive carbon black dispersed in a modified low density polyethylene resin. its electrical and mechanical properties are permanent and are not dependent on atmospheric conditions. Applications CABELEC CA4676 conductive compound has…

About Cheng Yu PE221 is a Low Density Polyethylene product. It is available in Asia Pacific. Characteristics include: Flame Rated Flame Retardant&& Product Description Supplier Cheng Yu Generic LDPE Material Status Commercial: Active Features Flame Characteristics,V-2 Availabilitys Asia Pacific Technical…

About Indothene 1005FY20 is a Low Density Polyethylene product. It is available in Africa & Middle East, Asia Pacific, or Europe.&& Product Description Supplier Reliance Generic LDPE Material Status Commercial: Active Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data…

About SABIC® LDPE   PCG01 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG01 is an additive-free grade produced using SABIC’s proprietary high…

About LDPE 1022 FN 24 is a low density polyethylene produced by a high pressure process. LDPE 1022 FN 24 is suited to many applications in the field of consumer, industrial, food or hygiene packaging such as bags, lamination and…

About HP4023WN是一种不含抗氧化剂的低密度聚乙烯，适用于生产通用薄膜。 它含有防滑剂和防粘连添加剂。 它具有优良的加工性和光学性能，并具有良好的机械性能。HP4023WN可用于高清晰度洗衣袋，纺织品包装薄膜，生产袋子，拉链锁袋。 Product Description Supplier SABIC Generic LDPE Material Status Commercial: Active Features Excellent Processability,Low Light Diffusion Technical Data PHYSICAL Nominal value Unit Test method Melt Flow Rate 190℃，2.16kg 4.0 g/10min ASTM D1238 Density 0.923 g/cm³ ASTM D1505…

About PB608 is a grade produced under high pressure in an autoclave reactor. This grade is especially designed for injection molding of articles that must show excellent flexibility properties and very good flow ability. Additive: No additives present. Applications: Masterbatches;…

About SABIC® LDPE Powder 1922P5 is a pure, additive free standard CTR® tubular grade and a typically fine material for general purpose use. This grade is supplied in powder form. Application SABIC® LDPE Powder 1922P5 is a medium sized powder…

About COSMOTHENE® L705 is a Low Density Polyethylene product. It can be processed by extrusion coating and is available in Asia Pacific. Typical application: Coating Applications. Characteristics include: Good Adhesion Good Processability Good Sealability&& Product Description Supplier TPC Generic LDPE…

About International grade: PE-M-18D500&& Product Description Generic LDPE Material Status Commercial: Active Availabilitys Asia Pacific Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 0.916 g/cm³ ASTM D1505 Melt Flow Rate 50 g/10min ASTM D1238 MECHANICAL…

About LDPE for Film products Applications M21G864 are particularly suitable for mono and co-extrusion applications such as deep freeze, form fill seal film in general and thin bags. In blends and co-extrusions, they can be used to boost the impact…

About SUMIKATHENE® F218-0 is a Low Density Polyethylene material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary attribute of SUMIKATHENE® F218-0: High Strength. Typical application of SUMIKATHENE® F218-0: Film&& Product Description…

About Lupolen 1800 S is a low density polyethylene (LDPE) resin used in injection molding and other processing methods. It exhibits high flowability, and good softness, toughness and dimensional stability. Lupolen 1800 S is delivered in pellet form and is…

About Overview HFDK-9253 is a long-life, unfilled, crosslinkable, low sag, low density polyethylene insulation compound designed for distribution and transmission power cable insulation applications. HFDK-9253 has been designed for cable production processes on horizontal vulcanization lines and for cables with…

About This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability Very high line speed at low coating weights Processability at lower extrusion temperature High temperature extrusion stability Excellent drawdown characteristics Low neck-in Typical extrusion coating…

About LD 655 is a very high flow LDPE grade, with a very good flexibility.&& Product Description Supplier ExxonMobil Generic LDPE Material Status Commercial: Active Availabilitys Africa & Middle East ,Asia Pacific,Europe Technical Data MECHANICAL Nominal value Unit Test method…

About LDF200YZ is a low density polyethylene resin for film extrusion. LDF200YZ has no slip and anti-block additives. LDF200YZ meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1…

About This low density polyethylene is tailored for blown film applications that require: Superb optics Excellent impact strength Exceptional processability High coefficient of friction Typical blown film resin applications include: Produce bags Frozen food packaging Dry goods packaging Case shrink…