About 33% Glass Reinforced, Flame Retardant&& Product Description Supplier DSM Generic PET Material Status Commercial: Active Features Flame Characteristics,V-0 Availabilitys Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.75 g/cm³ ISO 1183 Water absorption…
About PET glass fiber reinforced 30%, self extinguishing V0 without PBDE/PBDF, good flame proofing also at low thickness, high temperature resistance, good flow, very good mechanical, thermal and electrical properties, low moisture absorption, good dimensional stability. Product must be dryed…
About Mylar® EL (92 guage) is a Polyethylene Terephthalate (PET) product. It is available in North America. Applications of Mylar® EL (92 guage) include coating applications, electrical/electronic applications and film. Characteristics include: Chemical Resistant Good Flexibility Heat Resistant High Strength&&…
About Eastapak™ Polymer 9921 is an 0.80 ltV (dL/g) copolymer PET that has proven itself as an exceptional, cost-effective option that continues to surpass expectations for quality, efficiency and convenience in a wide array applications.&& Product Description Supplier Eastman Generic…
About 15% Glass Reinforced, Flame Retardant, Polyethylene Terephthalate Product Description Supplier EnCom Generic PET Material Status Commercial: Active Features Flame Characteristics Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit…
About PET 9130-200 is a 30% glass fiber reinforced injection molding grade.&& Product Description Supplier Chang Chun Generic PET Material Status Commercial: Active Features V-0 Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Skyrol® SH71E is an optically clear polyester film with a smooth surface, high gloss, and good dimensional stability. SH71E is slip-treated on one side for good handling characteristics.&& Product Description Supplier SKC Generic PET Material Status Commercial: Active Features…
About 45% Glass Reinforced Polyethylene Terephthalate&& Product Description Supplier DuPont Generic PET Material Status Commercial: Active Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test method Density 1.70 g/cm³…
About LOFEX ® A31LL is Polyester film is optically clear and both sides urethane treated with enhances adhesion to UV ink and coatings. It can use by silicon release film, protection film, window film because it has excellent run, easy…
About 33% Glass Reinforced, Flame Retardant&& Product Description Supplier DSM Generic PET Material Status Commercial: Active Features Flame Characteristics,V-2,V-0 Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.73 g/cm³ ISO 1183 Water absorption rate Saturation, 23 ℃…
About LOFEX ® A311S Polyester film is optically clear and inside corona / outside slip treated with excellent properties by tensile strength, proper elongation and the thermal contraction rate. It can use by release film, laminating film and tape because…
About Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no…
About 阻燃增强聚对苯二甲酸乙二醇酯，阻燃 UL 94 V-0，高机械强度，高耐温性，电气性能好 Product Description Supplier Kingfa Generic PET Material Status Commercial: Active Features Good Rigidity,Good flexibility,Good Dimensional Stability,Fatigue resistance,Solvent resistance Availabilitys Asia Pacific Technical Data MECHANICAL Nominal value Unit Test method tensile strength 10 mm/min 130 MPa…
About 35% Glass Reinforced&& Product Description Supplier DSM Generic PET Material Status Commercial: Active Features HB Availabilitys Asia Pacific,Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.63 g/cm³ ISO 1183 Shrinkage rate ISO 294-4 TD 0.95 %…
About Vypet VNT 340 HD is a 40% glass/mineral reinforced PET injection molding compound designed for electrical and structural applications, with High Dielectric Strength Features: High temperature performance Excellent strength & high stiffness Excellent dimensional stability Applications: Electric motors Brackets…
About Comco PETP是一种聚对苯二甲酸乙二酯(PET)材料,。 该产品在欧洲有供货,。 Comco PETP的主要特性为:阻燃/额定火焰。&& Product Description Generic PET Material Status Commercial: Active Features HB Availabilitys Europe Technical Data PHYSICAL Nominal value Unit Test method Density 1.39 g/cm³ ISO 1183 Water absorption rate Saturation, 23 ℃ 0.50 % Equilibrium,…
About Flame retardant PET reinforced with 30% glass fiber, without PBDE; high CTI&& Product Description Supplier A. Schulman Generic PET Material Status Commercial: Active Features Flame Characteristics,No antimony,Halogenated,V-0,5VA Availabilitys Africa & Middle East ,North America,Latin America,Asia Pacific,Europe Process Methods Injection…
About PET 9130-104 is a 30% glass fiber reinforced injection molding grade.&& Product Description Supplier Chang Chun Generic PET Material Status Commercial: Active Features V-0 Availabilitys North America,Asia Pacific,Europe Process Methods Injection Molding Technical Data PHYSICAL Nominal value Unit Test…
About Petra 130 is a 30% glass fiber reinforced polyethylene terephthalate injection molding compound. It is available in natural and pigmented versions. It exhibits a superb combination of performance properties including high strength and stiffness at elevated temperatures with good…
About LOFEX ® A311A is Polyester film is optically clear and inside corona / outside acryl treated with enhanced adhesion to inks and coatings. So, it can use by window film, label and print film. Also, it has excellent properties…