About T-Blend® 4000N-FM is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It is available in Asia Pacific. Applications of T-Blend® 4000N-FM include consumer goods, foam, household applications and sporting goods. Characteristics include: Wear Resistant Eco-Friendly/Green Good Flexibility Good…
About Kraton G1652 E is a clear, linear triblock copolymer based on styrene and ethylene/butylene (S-EB-S) with a polystyrene content of 29%. It is supplied from Europe in the physical form identified below. Kraton G1652 EU – supplied as an…
About The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The…
About Dryflex A thermoplastic elastomer (TPE) bondable grades, primarily based on SBS and SEBS, increase freedom of design and open up a vast range of application opportunities. It used to be a complex and costly affair producing details made of…
About EMPILON® HAR series compound are specially designed for over-molding with engineering plastic such as ABS, PC, Nylon, PETG, PBT etc. which are commonly use in the 3C industry (Computer, Communication and Consumer electronics) as well as hand held device…
About megol® CUG 90 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It can be processed by injection molding and is available in Europe. Primary characteristic: food contact acceptable.&& Product Description Generic SEBS Material Status Commercial: Active Features…
About Kraton G1652 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton G1652 MU – supplied as an…
About Kraton G1657 M is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. Kraton G1657 MS – supplied as a dusted pellet…
About EMPILON® HT series compound has excellent Tensile Strength property, good resilience, low specific gravity, good electrical and mechanical properties. The EMPILON® HT series can be applied in many fields of use, such as: power tool grips, automotive parts, sporting…
About The Evoprene™ GC series was created to provide cost effective solutions for processors and end users alike. If temperature resistance, weatherability and processing performance are paramount then it is best to choose an Evoprene™ Super G, HP or Evoprene™…
About Preliminary datasheet Mediprene® 500402M: Thermoplastic Elastomer Basic material: TPS-SEBS Hardness: 40 Shore A (4 mm) Service temperature range: -50 — +125°C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be…
About Globalprene® 9551U is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific or North America. Important attributes of Globalprene® 9551U are: REACH Compliant RoHS Compliant Copolymer Heat Resistant High Strength Typical applications include:…
About The téfabloc® engineering plastics make use of the elastomeric properties of styrenic bloc co-polymer (SBS) and of hydrogenated styrenic bloc co-polymers (SEBS). The specific structure of téfabloc® combines the physical properties of a vulcanised rubber with the advantages of…
About The Evoprene COGEE range was specially developed to provide materials which will comould or coextrude to engineering thermoplastics (ETPs). This enables, for example, polyamide (nylon) handles or ABS housings to be given a solt touch feel whilst polycarbonate lenses…
About EMPILON® 7 series compound has a higher Tensile Strength property, good resilience, excellent mechanical properties than that of the 5 series. EMPILON® 7 series can be applied in many fields of use, such as: hand grips, automotive parts, household…
About Globalprene® 9552 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Asia Pacific or North America. Important attributes of Globalprene® 9552 are: REACH Compliant RoHS Compliant Copolymer Heat Resistant High Strength Typical applications include:…
About Mediprene 500502M: Thermoplastic Elastomer Material Type: TPS-SEBS Hardness: 50 Shore A (4mm) Service Temperature Range: -50 — +100°C (unstressed material) Colour: Transparent, but can be available in any colour. Presentation: Free flowing pellets that can be processed without predrying,…
About megol® DP2433/70PBT is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It can be processed by injection molding and is available in Europe.&& Product Description Generic SEBS Material Status Commercial: Active Features Weather resistance is good,Excellent Processability,Alkali resistant,Good…
About The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The…
About Comply with WEEE/RoHS directive Comply with SONY SS-00259 6th requirement Free of Phthalates plasticizer Non-toxic and free of TetraBisPhenol A UL 94 V-0 flame class rating (UL File No.E196953) EMPILON® 8800 series compound has excellent mechanical properties, good electrical…