| About |
|---|
| Celstran PP-GF40-23 is a 40% long glass fiber Polypropylene. The -23 can be used in food contact applications since all of the raw materials contained within are FDA compiant. This material imparts excellent impact and modulus properties that exceed that of short glass fiber polypropylene.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,Food contact compliance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| — | 9300 | MPa | ISO 527-2/1A/1 |
| 80℃ | 7000 | MPa | ISO 527-2/1A |
| tensile strength | |||
| fracture | 137 | MPa | ISO 527-2/1A/5 |
| 80℃ | 80.0 | MPa | ISO 527-2/1A |
| Tensile strain | |||
| fracture | 2.2 | % | ISO 527-2/1A/5 |
| Fracture, 80 ℃ | 2.4 | % | ISO 527-2/1A |
| Bending modulus | ISO 178 | ||
| 23℃ | 9300 | MPa | ISO 178 |
| 80℃ | 7000 | MPa | ISO 178 |
| bending strength | ISO 178 | ||
| 23℃ | 220 | MPa | ISO 178 |
| 80℃ | 125 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 35 | kJ/m² | ISO 179/1eA |
| 23℃ | 30 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 50 | kJ/m² | ISO 179/1eU |
| 23℃ | 70 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 159 | ℃ | ISO 75-2/A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90 to 100 | °C | |
| Drying time | 4.0 | hr | |
| Recommended maximum moisture content | 0.20 | % | |
| Barrel rear temperature | 210 to 220 | °C | |
| Barrel middle temperature | 220 to 230 | °C | |
| Barrel front temperature | 230 to 240 | °C | |
| Nozzle temperature | 230 to 250 | °C | |
| Processing (melt) temperature | 230 to 250 | °C | |
| Mold temperature | 40 to 70 | °C | |
| Injection speed | Slow | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |