| About |
|---|
| CONAPOXY FR-1820 is a two-component, flame retardant, short pot life epoxy potting and casting system with excellent handling properties. CONAPOXY FR-1820 contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR-1820 has been tested by Underwriters Laboratories to be RoHS compliant and recognized to UL 94V-0.&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Foaming performance,V-0 |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 0.984 | g/cm³ | |
| — | 1.65 | g/cm³ | |
| Water absorption rate | |||
| 24hr | 0.26 | % | |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 2.2E+15 | ohms | |
| Volume resistivity | |||
| 25 ℃ | 4.6E+14 | ohms·cm | |
| Dielectric strength | 19 | kV/mm | |
| Dielectric constant | |||
| 25 ℃，1 kHz | 4.18 | ||
| Dissipation factor | |||
| 25℃，1 kHz | 0.024 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 4.8 mm | V-0 | UL 94 |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 6900 | cP |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear Shrinkage | 0.010 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 80 to 85 | ||
| tensile strength | 33.6 | MPa | |
| Tensile strain | |||
| fracture | 3.0 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.50 | W/m/K | |
| Thermosetting components | |||
| resin | 按重量计算的混合比: 100 | ||
| Hardening method | 按重量计算的混合比: 25 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Hardener |
| 3. Resin |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |