| About |
|---|
| CYCOM® 977-3 is a 350°F (177°C) curing resin. It is a toughened epoxy resin with 350°F (177°C) dry and 270°F (132°C) wet service capability. CYCOM 977-3 is formulated for autoclave or press molding and can be cured at 350°F (177°C) for six hours. Unidirectional tape and woven fabric impregnated with CYCOM 977-3 resin will retain tack for 21 days at 72°F (22°C). It has a long mechanical out life suitable for fabrication of large structures.&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | High impact resistance,Baking,High pressure heat resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 3720 to 3860 | MPa | |
| bending strength | 117 to 172 | MPa | |
| compressive strength | 184 to 188 | MPa |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |