Dryflex® 660800S

About
The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.&&

About

The 660S series is recommended when the properties of the produced detail requires the advantages of the 500S series in combination with the 600S series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow and mechanical properties as well as reasonable scratch resistance. Compounds in the 600S series are available in hardness from shore A to 90 Shore A in natural and black colours but they can easily be coloured in any shade.&&

Product Description
Generic	SEBS
Material Status	Commercial: Active
Features	Weather resistance is good,Good liquidity,Food contact compliance,Solvent resistance,High scratch resistance,Good coloring,Agglomerability
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.05	g/cm³	ASTM D792
Melt Flow Rate
190℃，5.0kg	15	g/10min	ASTM D1238
Shrinkage rate	0.80 to 2.0	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	80		ASTM D2240
tensile strength			ASTM D638
—	9.00	MPa	ASTM D638
100% strain	4.00	MPa	ASTM D638
300% strain	5.00	MPa	ASTM D638
Tensile strain
fracture	> 600	%	ASTM D638

elastic body	Nominal value	Unit	Test method
tear strength	38.0	kN/m	ASTM D624
Compression deformation
23℃，72 hr	28	%	ASTM D395

THERMAL	Nominal value	Unit	Test method
Operating temperature	-50 to 125	℃

Supplementary information	Nominal value	Unit	Test method
Overmold Bonding（to PP）	Excellent

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.