E-Pos 327H - SOLIAO

About
Product description E-Pos 327H is a non diluted bisphenol A based epoxy resin with a relatively low viscosity. Applications E-Pos 327H is used at room temperature in combination with amine-based curing agents in the formulation of two-component reactive systems. Systems based on E-Pos 327H exhibit superior mechanical and chemical resistance properties as well as an excellent heat resistance. The slightly lower viscosity of E-Pos 327H compared to standard bisphenol A-based resins allows the formulation of systems with higher pigment and/or filler loadings. E-Pos 327H can be used in a variety of applications in the field of civil engineering such as floorings or adhesives, in the formulation of solventfree or high-solids coatings, in composite applications, in electronic such as laminates en in thermal and electrical isolation applications.&&

About

Product description E-Pos 327H is a non diluted bisphenol A based epoxy resin with a relatively low viscosity. Applications E-Pos 327H is used at room temperature in combination with amine-based curing agents in the formulation of two-component reactive systems. Systems based on E-Pos 327H exhibit superior mechanical and chemical resistance properties as well as an excellent heat resistance. The slightly lower viscosity of E-Pos 327H compared to standard bisphenol A-based resins allows the formulation of systems with higher pigment and/or filler loadings. E-Pos 327H can be used in a variety of applications in the field of civil engineering such as floorings or adhesives, in the formulation of solventfree or high-solids coatings, in composite applications, in electronic such as laminates en in thermal and electrical isolation applications.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Low Viscosity,High Heat Resistance,Solvent resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Gardner color	< 1.00

Supplementary information	Nominal value	Unit	Test method
Epoxy equivalent	182 to 188	g/mol

Uncured Properties	Nominal value	Unit
Solid content	100	%
Density
20℃	1.16	g/cm³
viscosity
25℃	10 to 12	Pa·s

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.