About |
---|
EASYPOXY K-20 is a general purpose, two-component, room-temperature curing adhesive/sealant that bonds a wide variety of surfaces. EASYPOXY K-20 is relatively insensitive to mixing ratios. Since there are no solvents, there is no fire hazard. EASYPOXY K-20 is non-toxic when cured and is widely used for bonding, sealing, and repairing metal, wood, rubber, and most plastics.&& |
Product Description | |
---|---|
Supplier | Cytec Industries |
Generic | 环氧树脂 |
Material Status | Commercial: Active |
Features | Nontoxicity |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.35 | g/cm³ | |
Shrinkage rate | |||
MD | 0.70 | % | |
Water absorption rate | |||
25℃,24hr | 0.40 | % | |
viscosity | |||
Part A,25℃ | Paste | ||
Part B,25℃ | Paste |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Volume resistivity | |||
25 ℃ | 4.0E+13 | ohms·cm | |
Dielectric constant | |||
25 ℃,1 kHz | 4.60 | ||
Dissipation factor | |||
25℃,1 kHz | 0.012 |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Antifungal activity | Non-nutrient |
Cured Properties | Nominal value | Unit | Test method |
---|---|---|---|
lap shear strength | |||
-55℃ | 11.0 | MPa | |
25℃ | 17.2 | MPa | |
82℃ | 15.9 | MPa |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 85 | ||
tensile strength | 20.7 | MPa | |
bending strength | 41.4 | MPa | |
compressive strength | 68.9 | MPa |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Thermal conductivity coefficient | 0.24 | W/m/K | |
Thermosetting components | |||
resin | 按重量计算的混合比: 100 | ||
Hardening method | 按重量计算的混合比: 45 | ||
storage stability | |||
25 ℃ | 20 | min | |
Storage period | 78 | wk | |
stripping time | |||
25℃ | 1400 | min | |
65℃ | 120 | min |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |