EASYPOXY® K-22

About
EASYPOXY K-22 is a general purpose, two-component, room-temperature curing adhesive/sealant that bonds a wide variety of surfaces. EASYPOXY K-22 is relatively insensitive to mixing ratios. Since there are no solvents, there is no fire hazard. EASYPOXY K-22 is non-toxic when cured and is widely used for bonding, sealing, and repairing metal, wood, rubber, and most plastics.&&

Product Description
SupplierCytec Industries
Generic环氧树脂
Material StatusCommercial: Active
FeaturesNontoxicity
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density1.35g/cm³
Shrinkage rate
MD0.70%
Water absorption rate
25℃,24hr0.40%
viscosity 
Part A,25℃Paste 
Part B,25℃Paste 

Electrical performanceNominal valueUnitTest method
Volume resistivity
25 ℃4.0E+13ohms·cm
Dielectric constant
25 ℃,1 kHz4.60 
Dissipation factor
25℃,1 kHz0.012 

Supplementary informationNominal valueUnitTest method
Antifungal activityNon-nutrient 

Cured PropertiesNominal valueUnitTest method
lap shear strength 
-55℃11.0MPa
25℃17.2MPa
82℃15.9MPa

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D85 
tensile strength20.7MPa
bending strength41.4MPa
compressive strength68.9MPa

THERMALNominal valueUnitTest method
Thermal conductivity coefficient0.24W/m/K
Thermosetting components 
resin按重量计算的混合比: 100 
Hardening method按重量计算的混合比: 45 
storage stability
25 ℃20min
Storage period78wk
stripping time 
25℃1400min
65℃120min

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.