| About |
|---|
| Silicone Rubber, LSR Connectors, Automotive & Transportation Molded Seals, Plastics and Rubber Processing Molded Parts, Automotive, Plastics and Rubber Processing Molded Parts, Technical, Plastics and Rubber Processing&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Self-lubricating |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Liquid injection molding |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | Opaque | ||
| Density | 1.12 | g/cm³ | ISO 1183 |
| viscosity | 1000 | Pa·s | DIN 53019 |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 30 | DIN 53505 | |
| tensile strength | 8.00 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 700 | % | DIN 53504 |
| Compression deformation | 19 | % | DIN ISO 815-B |
| tear strength | 20.0 | kN/m | ASTM D624-B |
| Fluid Content | 3.0 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |