ELASTOSIL® R plus 4000/60

About
Silicone Rubber, HTV Molded Parts, Medical, Plastics and Rubber Processing&&

Product Description
Supplier	Wacker
Generic	硅酮
Material Status	Commercial: Active
Features	Food contact compliance,Good tear strength
Availabilitys	North America

Technical Data
Uncured Properties	Nominal value	Unit	Test method
colour	Clear/Transparent
Density	1.16	g/cm³	ISO 1183

Cured Properties	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	60		DIN 53505
tensile strength	9.50	MPa	DIN 53504
Tensile strain
fracture	750	%	DIN 53504
Compression deformation	23	%	DIN ISO 815-B
tear strength	48.0	kN/m	ASTM D624-B
Resilience	50	%	DIN 53512

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.