| About |
|---|
| EMPILON® 7 series compound has a higher Tensile Strength property, good resilience, excellent mechanical properties than that of the 5 series. EMPILON® 7 series can be applied in many fields of use, such as: hand grips, automotive parts, household goods, sporting goods, stationary, toys etc. Hydrogenated Styrenic Block Copolymer is the main content of this 7 series compound, its hardness ranges from Shore A 16 ~ Shore D 52. They can be rocessed by ordinary plastic machinery for Injection, extrusion or calendaring etc.&& |
| Product Description | |
|---|---|
| Supplier | EMPILON |
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Renewable resources,Hydrolysis stability,Halogen free,No antimony,Block Copolymer,Elastic,Lead content is low to none,Nontoxicity,Low to no calcium content |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 6.0 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.2 | % | |
| TD | 1.8 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 10 seconds | 51 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 2.75 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -50.0 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Reference Only |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |