| About |
|---|
| One Component Epoxy This material is suitable for high temperature applications. The Epic 0174 material is an excellent candidate for filter end-cap adhesion applications. This material bonds to a variety of substrates, has good chemical resistance and maintains physical integrity in applications up to 350°F. Application: End-Cap Adhesive&& |
| Product Description | |
|---|---|
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Solvent resistance,Agglomerability |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s D, 110 ℃ | 75 to 95 | ASTM D2240 | |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 30000 to 50000 | cP | ASTM D2393 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 RPM |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |