| About |
|---|
| Extir AM A 2000 AE is an HBCD-free flame retardant expandable polystyrene in the form of spherical beads of fine particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. Extir AM A 2000 AE is used for production of shaped mouldings with thin sections and with a good surface finishing. Extir AM A 2000 AE is used mainly in thin section packaging where, for legislative or safety reasons, the use of a flame retardant material is required. Typical applications are: thin section packaging (from 5 to 10 mm) decorative ceiling panels baby/child safety seat&& |
| Product Description | |
|---|---|
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Foaming performance,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.0180 to 0.0300 | g/cm³ | |
| Apparent density | |||
| — | 0.59 to 0.63 | g/cm³ | |
| — | 0.02 | g/cm³ | |
| Particle size | 400 to 750 | µm | |
| Notes |
|---|
| 1. Pentane |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. on a discontinuous pre-expander |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |