| About |
|---|
| Product Description | |
|---|---|
| Generic | POM |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Filler content | 20 | % | |
| proportion | 1.52 | g/cm³ | ASTM D792 |
| Forming shrinkage rate | 1.5-1.7 | % | ASTM D955 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 161 | ℃ | ASTM D648 |
| Flame retardancy | |||
| UL 94 | HB | 1.5mm |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 55 | MPa | ASTM D638 |
| bending strength | 150 | MPa | ASTM D790 |
| Notch impact strength | 3.3 | kg.cm/cm | ASTM D256 |
| Rockwell hardness | 82 | M-scale | ASTM D785 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |