FV30G3 - SOLIAO

About

Product Description
Generic	POM
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Filler content	30	%
proportion	1.63	g/cm³	ASTM D792
Forming shrinkage rate
horizontal direction	0.3-0.5	%	ASTM D955
vertical direction	1.2-1.6	%	ASTM D955

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	165	℃	ASTM D648
Flame retardancy
UL 94	HB		1.5mm

MECHANICAL	Nominal value	Unit	Test method
tensile strength	69	MPa	ASTM D638
bending strength	215	MPa	ASTM D790
Notch impact strength	4.2	kg.cm/cm	ASTM D256
Rockwell hardness	83	M-scale	ASTM D785

Electrical performance	Nominal value	Unit	Test method
Dielectric constant	4.0	60Hz	ASTM D150
Surface resistivity	1.0E+16	ohm	ASTM D257

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.