| About |
|---|
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.42 | g/cm³ | ISO 1183 |
| Melt flow rate | |||
| 190°C/20.325 kg | 16 | g/10 min | ASTM D1238 |
| hardness | |||
| Support D | 79 | ISO 868 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| yield | 51.0 | MPa | ISO 527-2 |
| fracture | 48.5 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 130 | % | ISO 527-2 |
| Bending modulus | 3250 | MPa | ISO 178 |
| Flammability | Nominal value | Unit | Test method |
|---|---|---|---|
| UL flame retardant rating | V-0 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Notched Impact strength | |||
| 23°C | 70 | J/m | ISO 180, ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 76.0 | ℃ | ISO 306/B |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |