Globalene® 7633-3

About
Globalene® 7633-3 is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific or North America for blow molding, injection molding, pipe extrusion, or sheet extrusion. Important attributes of Globalene® 7633-3 are: Copolymer Good Processability Heat Resistant Impact Resistant Typical applications include: Automotive Bottles Containers Furniture Plumbing/Piping/Potable Water&&

About

Globalene® 7633-3 is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in Asia Pacific or North America for blow molding, injection molding, pipe extrusion, or sheet extrusion. Important attributes of Globalene® 7633-3 are: Copolymer Good Processability Heat Resistant Impact Resistant Typical applications include: Automotive Bottles Containers Furniture Plumbing/Piping/Potable Water&&

Product Description
Supplier	Lee Chang Yung
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Good heat aging resistance,low-temperature impact resistance,Impact copolymer
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.896	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	3.0	g/10min	ASTM D1238
Shrinkage rate
MD	1.4	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	160	J/m	ASTM D256
Notched impact strength of cantilever beam
-18℃	1300	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	90	℃	ASTM D648

Supplementary information	Nominal value	Unit	Test method
Drop hammer impact
-29℃	32.5	J	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	79		ASTM D785
tensile strength
yield	25.5	MPa	ASTM D638
Tensile strain
yield	7.0	%	ASTM D638
Bending modulus	1300	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.