| About |
|---|
| The Lifoflex GA, GB and GC series are TPE compounds based on SEBS. They are suited to a wide variety of applications and are characterised by easy processing and high flexibility.&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good flexibility,Renewable resources,Good bond |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.890 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 3 seconds | 20 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| TD, yield | 4.90 | MPa | DIN 53504 |
| Tensile strain | |||
| TD, fracture | 950 | % | DIN 53504 |
| Compression deformation | ISO 815 | ||
| 23℃，72 hr | 14 | % | ISO 815 |
| 70℃，24 hr | 30 | % | ISO 815 |
| 100℃，24 hr | 54 | % | ISO 815 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |