LIHAN® C9706 - SOLIAO

About
LIHAN® C9706 is a Polycarbonate (PC) product. It can be processed by injection molding and is available in Asia Pacific. Primary characteristic: flame rated.&&

Product Description
Supplier	Lihan
Generic	Polycarbonate
Material Status	Commercial: Active
Features	HB
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42	g/cm³	ISO 1183
Shrinkage rate	0.20 to 0.30	%
water content	0.30	%	ISO 62

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	12	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	155	℃	ISO 75-2/B
1.8 MPa, unannealed	143	℃	ISO 75-2/A
Linear coefficient of thermal expansion
MD	2.5E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+14	ohms	ASTM D257
Dielectric strength	16	kV/mm	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ISO 2039-2
tensile strength
fracture	130	MPa	ISO 527-2
Tensile strain
fracture	2.0	%	ISO 527-2
Bending modulus	800	MPa	ISO 178
bending strength	160	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	240 to 275	°C
Mold temperature	60 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.