| About |
|---|
| LOCTITE® EA 193124 / EA 193125™ is a low viscosity adhesive that can be gelled to a tack free, non-flow state with a few seconds of exposure to moderate UV light and then fully cured at room temperature or rapidly at elevated temperatures. The fully cured system develops strong, tough, high performance bonds to metals, ceramics, phenolics, polyesters, epoxies, urethanes and many other plastics. LOCTITE® EA 193124 / EA 193125™ is a durable, electrically insulating adhesive that provides good resistance to gases, vapors, petroleum solvents, fuels, salt solutions, mild acids and alkalis.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Alkali resistant,Low Viscosity,UV Cure,Acidproof,Baking,Durability,Solvent resistance,Insulation,Fuel resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s D | 80 | ISO 868 | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2670 | MPa | ISO 527-3 |
| tensile strength | |||
| yield | 40.0 | MPa | |
| fracture | 38.0 | MPa | |
| Tensile strain | |||
| yield | 4.0 | % | |
| fracture | 6.0 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 50.0 | ℃ | ASTM E1640 |
| Linear coefficient of thermal expansion | |||
| MD | |||
| < 50℃ | 7.0E-5 | cm/cm/℃ | |
| > 50℃ | 1.9E-4 | cm/cm/℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.550 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Amber | ||
| — | Yellow | ||
| Volume Mixing Ratio (PBV) | |||
| Resin | 2.0 | ||
| Hardener | 1.0 | ||
| Density | |||
| 25℃ | 0.918 to 1.02 | g/cm³ | |
| 25℃ | 1.10 to 1.20 | g/cm³ | |
| viscosity | |||
| Brookfield, 25 ℃ | 0.75 to 2.5 | Pa·s | |
| — | 4.7 | Pa·s | |
| Brookfield, 25 ℃ | 4.5 to 10 | Pa·s | |
| storage stability | 11 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Hardener |
| 3. Resin |
| 4. Resin, Spindle 14, speed 100 rpm |
| 5. Mixed, Cone & Plate |
| 6. Hardener, Spindle 14, speed 50 rpm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |