Lytex 4182 - SOLIAO

About
Lytex 4182 is a carbon fiber (PAN) reinforced epoxy sheet molding compound designed for structural applications requiring good mechanical properties, retention of properties at elevated temperatures, good chemical resistance, and low density. It utilizes a 12K Tow carbon fiber reinforcement.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Solvent resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³	ASTM D792
Shrinkage rate
MD	0.0	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength	138	MPa	ASTM D638
Bending modulus	27600	MPa	ASTM D790
bending strength	310	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	800	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	302	℃	ASTM D648
Continuous use temperature	177	℃	ASTM D794
Linear coefficient of thermal expansion
MD	5.4E-6	1/℃	ASTM D696
Thermal conductivity coefficient	0.45	W/m/K	ASTM C177
Storage period
-12℃	26	wk
stripping time
138℃	5.0 to 10	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.