Magnobond 87 - SOLIAO

About
Magnobond 87 is an Epoxy; Epoxide (Epoxy) product. It is available in North America. Typical application: Foam. Primary characteristic: heat resistant.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Thixotropic,High Heat Resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.803	g/cm³	ASTM D1505
Water absorption rate
24hr	0.12	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
compressive strength	92.4	MPa	ASTM D695

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 8.0
stripping time
25℃	1400	min
Post curing time
93℃	2.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.