| About |
|---|
| MTM79 is an 80 to 180°C (176 to 356°F) curing epoxy matrix for the manufacture of components operating at high service temperatures. MTM79 has been developed specifically for motorsport bodywork applications.&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Baking |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | |||
| — | 97.0 | ℃ | |
| — | 138 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |