| About |
|---|
| Mylar Type A films have balanced tensile properties and excellent resistance to moisture and most chemicals. They can withstand temperature extremes from -94 to 302°F. Mylar does not become brittle with age under normal conditions, because it contains no plasticizers.&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Good bond,Moisture resistance,Low smoothness,Solvent resistance,Heat Stabilized |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.39 | g/cm³ | ASTM D1505 |
| Shrinkage rate | ASTM D955 | ||
| MD：0.0750 mm | 1.2 | % | ASTM D955 |
| TD：0.075 mm | 0.80 | % | ASTM D955 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 75 | µm | |
| tensile strength | ASTM D882 | ||
| MD, yield | 186 | MPa | ASTM D882 |
| TD, yield | 214 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 140 | % | ASTM D882 |
| TD, fracture | 110 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 29 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |