| About |
|---|
| Mylar® EL (92 guage) is a Polyethylene Terephthalate (PET) product. It is available in North America. Applications of Mylar® EL (92 guage) include coating applications, electrical/electronic applications and film. Characteristics include: Chemical Resistant Good Flexibility Heat Resistant High Strength&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Good Electrical Properties,High Heat Resistance,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.39 | g/cm³ | ASTM D1505 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 23 | µm | |
| tensile strength | ASTM D882 | ||
| MD, yield | 200 | MPa | |
| TD, yield | 234 | MPa | |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 120 | % | |
| TD, fracture | 91 | % |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+16 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+18 | ohms·cm | ASTM D257 |
| Dielectric strength | 280 | kV/mm | ASTM D149 |
| Dissipation factor | |||
| 1 MHz | 0.016 | ASTM D150 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 16 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |