| About |
|---|
| Okirol® E-3 is expandable polystyrene containing pentane as the blowing agent. The product is supplied as spherical beads. Okirol® E-3 is used for the manufacture of low density blocks, panels and shapes for general and specific purposes&& |
| Product Description | |
|---|---|
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 0.0150 to 0.0180 | g/cm³ | EN 1602 |
| — | 0.0140 | g/cm³ | |
| Apparent density | 0.61 | g/cm³ | ISO 60 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bead diameter | ISO 2591-1 | ||
| — | 1.40 to 2.20 | mm | ISO 2591-1 |
| Range | 1.00 to 2.50 | mm | ISO 2591-1 |
| Blowing Agent | 5.0 to 7.0 | % | ASTM 7132-05 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Minimum density of expanded beads |
| 3. Density of molded product |
| 4. >95% |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |