| About |
|---|
| Petra 130 BK112 is a 30% glass fiber reinforced, black pigmented polyethylene terephthalate injection molding compound. It exhibits a superb combination of performance properties including good strength and stiffness at elevated temperatures. It also has good chemical resistance and dimensional stability, and adequate ductility for most applications. Applications Petra 130 BK112 is generally recommended for applications such as automotive door lock components, housings, gears and electrical and mechanical components.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,Solvent resistance,HB |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.55 | g/cm³ | ASTM D792 |
| Density | 1.55 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.40 | % | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30℃ | 8.5 | kJ/m² | ISO 179 |
| 23℃ | 9.0 | kJ/m² | ISO 179 |
| Impact strength of cantilever beam notch | ISO 180 | ||
| 23℃ | 95 | J/m | ASTM D256 |
| -40℃ | 8.5 | kJ/m² | ISO 180 |
| 23℃ | 9.5 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 210 | ℃ | ISO 75-2/A |
| 1.8 MPa, unannealed | 215 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 235 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 240 | ℃ | ISO 75-2/B |
| Melting peak temperature | 245 | ℃ | ASTM D3418 |
| Melting temperature | |||
| DSC | 245 | ℃ | ISO 3146 |
| Linear coefficient of thermal expansion | |||
| MD | 2.3E-5 | 1/℃ | ASTM E831 |
| Relative temperature index | |||
| Electrical performance | UL 746 | ||
| Strength mechanical performance | UL 746 | ||
| Impact mechanical performance | UL 746 | ||
| 0.75 mm | 140 | ℃ | UL 746 |
| 1.5 mm | 140 | ℃ | UL 746 |
| 3.0 mm | 140 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | > 1.0E+13 | ohms·cm | IEC 60093 |
| 1.50 mm | > 1.0E+13 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.75 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 10200 | MPa | ISO 527-2 |
| tensile strength | ISO 527-2 | ||
| Fracture, 23 ℃ | 145 | MPa | ASTM D638 |
| Fracture, -40 ℃ | 211 | MPa | ISO 527-2 |
| Fracture, 23 ℃ | 145 | MPa | ISO 527-2 |
| Fracture, 120 ℃ | 54.0 | MPa | ISO 527-2 |
| Fracture, 150 ℃ | 42.0 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| Fracture, 23 ℃ | 3.0 | % | ASTM D638 |
| Fracture, -40 ℃ | 2.3 | % | ISO 527-2 |
| Fracture, 23 ℃ | 3.0 | % | ISO 527-2 |
| Fracture, 120 ℃ | 4.0 | % | ISO 527-2 |
| Fracture, 150 ℃ | 4.0 | % | ISO 527-2 |
| Bending modulus | |||
| 23℃ | 8250 | MPa | ISO 178 |
| 23℃ | 8760 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 230 | MPa | ASTM D790 |
| Rockwell hardness | |||
| R-level | 118 | ASTM D785 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 120 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Processing (melt) temperature | 280 to 300 | °C | |
| Mold temperature | 100 to 110 | °C | |
| Injection pressure | 3.50 to 12.5 | MPa | |
| Injection speed | Fast | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |