| About |
|---|
| A wide variety of resin designs can be applied to urethane-based floors, which are very resistant to shocks and abrasion and are used in factories, offices, athletic fields and many other places.&& |
| Product Description | |
|---|---|
| Supplier | DIC Corporation |
| Generic | PUR |
| Material Status | Commercial: Active |
| Features | noise reduction,Low coefficient of friction,Good wear resistance,Solvent resistance |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Shore hardness | |||
| Shaw’s A | 95 | JIS A6021 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 11.8 | MPa | |
| Tensile strain | |||
| fracture | 250 | % | |
| tear strength | 45.0 | kN/m |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent viscosity of melt | |||
| 25.0℃ | 1.30 | Pa·s | |
| 25.0℃ | 1.20 | Pa·s |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Mixing ratio | 1 : 1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Hardening Agent (E-570) |
| 3. Base Resin (PF-570) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |