Polyclear® Crystal PET 3302

About
Polyclear® Crystal PET 3302 is a copolymer packaging resin with a nominal intrinsic viscosity of 0.79 dl/g. Polyclear® Crystal PET 3302 is designed to have slow re-crystallization rates, and containers produced from the resin are noted for their excellent color and clarity. Polyclear® Crystal PET 3302 has been used successfully in pharmaceutical, personal care, household goods, liquor, and food containers as well as other custom containers. This polymer complies with the Federal Food, Drug, and Cosmetic Act for certain food applications. Please contact Indorama Ventures for specific FDA clearances. Polyclear® Crystal PET 3302 offers excellent performance in single-stage, integrated injection-stretch blow molding machines as well as in two-stage, one-step injection and stretch-blow machines. Containers made from Indorama Ventures PET are lightweight, have excellent clarity, and are shatterproof. With the important advantage of being totally recyclable, PET is the packaging material of choice.&&

About

Polyclear® Crystal PET 3302 is a copolymer packaging resin with a nominal intrinsic viscosity of 0.79 dl/g. Polyclear® Crystal PET 3302 is designed to have slow re-crystallization rates, and containers produced from the resin are noted for their excellent color and clarity. Polyclear® Crystal PET 3302 has been used successfully in pharmaceutical, personal care, household goods, liquor, and food containers as well as other custom containers. This polymer complies with the Federal Food, Drug, and Cosmetic Act for certain food applications. Please contact Indorama Ventures for specific FDA clearances. Polyclear® Crystal PET 3302 offers excellent performance in single-stage, integrated injection-stretch blow molding machines as well as in two-stage, one-step injection and stretch-blow machines. Containers made from Indorama Ventures PET are lightweight, have excellent clarity, and are shatterproof. With the important advantage of being totally recyclable, PET is the packaging material of choice.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Renewable resources,Food contact compliance,Copolymer
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	> 1.39	g/cm³	Internal Method
Apparent density	> 0.83	g/cm³	Internal Method
Intrinsic viscosity	0.79	dl/g	Internal Method
Acetaldehyde（Gas Chromatography）	< 2.0	ppm	Internal Method
Crystallinity
Pycnometer	> 50	%	Internal Method
water content
Karl Fischer titration, manufacturing	< 0.10	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Melting temperature	< 248	℃	DSC

Supplementary information	Nominal value	Unit	Test method
End carboxyl group content
Titration	< 45.0	meq/kg	Internal Method
Chip Size	< 2.00	g/100 pcs	Internal Method
Diethylene Glycol（Gas Chromatography）	< 2.3	wt%	Internal Method
Fines（Gravimetric determination，as manufactured）	0.050	%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. Not equivalent to bulk density found with fully packed, larger quantities.
3. 1% Solution in Dichloroacetic Acid; Determined by conversion of solution viscosity to intrinsic viscosity using an empirical correlation developed by Indorama Ventures equivalent to ASTM method D-4603.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.