| About |
|---|
| ProPell™ TPU 55D 0118A is an Unspecified product. It can be processed by extrusion or injection molding and is available in North America. Typical application: Medical/Healthcare. Primary characteristic: good aesthetics.&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Low coefficient of friction |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 128 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 75.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 380 | % | ASTM D638 |
| friction coefficient | ASTM D1894 | ||
| static state | 0.18 | ASTM D1894 | |
| static state | 0.019 | ASTM D1894 | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Teflon |
| 3. Stainless steel |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |