RAMAPET® P184

About
RAMAPET P184 is a slow crystallizing and non-reheat PET resin for thick walled applications that require optimal transparency, like refillable bottles, cosmetic bottles and jars and preforms for big containers like 5 Gallon. RAMAPET P184 has an IV of 0.84, has good optical properties and the mechanical properties are representative for a PET resin with IV of 0.84. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.&&

About

RAMAPET P184 is a slow crystallizing and non-reheat PET resin for thick walled applications that require optimal transparency, like refillable bottles, cosmetic bottles and jars and preforms for big containers like 5 Gallon. RAMAPET P184 has an IV of 0.84, has good optical properties and the mechanical properties are representative for a PET resin with IV of 0.84. RAMAPET thermoplastic polyesters are condensation polymers produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Food contact compliance
Availabilitys	Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Glass transition temperature	75.0 to 79.0	℃	ASTM D1238
Melting peak temperature	240 to 250	℃	ASTM D3418
Fusion heat	56.0	kJ/kg	ASTM E793

Supplementary information	Nominal value	Unit
Fines	< 0.1	wt%
Particle shape	Cubical
Particle size	2.50	mm
Pellet Weight	55.0 to 65.0	pcs/g

PHYSICAL	Nominal value	Unit	Test method
Density	1.39 to 1.40	g/cm³	ASTM D1505
Apparent density			ASTM D1895
pouring	0.83	g/cm³	ASTM D1895
vibration	0.88	g/cm³	ASTM D1895
Acetaldehyde	< 1.0	ppm
Color a	-3.50 to -0.500
Color b	-3.00 to 1.50
Color L	> 78.0
Crystallinity	45 to 55	%
Intrinsic viscosity	0.82 to 0.86	dl/g
water content	< 0.30	%
Melt density
285℃	1.20	g/cm³	ASTM D1238

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	150 to 170	°C
Drying time	6.0	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.