| About |
|---|
| Sarlink TPV 2473 is a high performance thermoplastic vulcanizate used in automotive and industrial applications. Sarlink TPV 2473 is a medium hardness, low density, RoHS compliant. This grade is suitable for both injection molding and extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPV |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.928 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 2.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 78 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 7.03 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 310 | % | ASTM D412 |
| Compression deformation | |||
| 70℃，22 hr | 39 | % | ASTM D395 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 173 to 213 | °C | |
| Barrel middle temperature | 179 to 219 | °C | |
| Barrel front temperature | 184 to 224 | °C | |
| Nozzle temperature | 190 to 230 | °C | |
| Processing (melt) temperature | 190 to 230 | °C | |
| Mold temperature | 35 to 60 | °C | |
| Injection pressure | 1.38 to 6.89 | MPa | |
| Injection speed | 快速 | ||
| Back pressure | 0.172 to 0.862 | MPa | |
| Screw speed | 50 to 120 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 166 to 204 | °C | |
| Barrel 2 zone temperature | 171 to 210 | °C | |
| Barrel 3 zone temperature | 177 to 216 | °C | |
| Barrel 5 zone temperature | 182 to 221 | °C | |
| Nozzle temperature | 190 to 227 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |