| About |
|---|
| Solarene® F644 is a General Purpose Polystyrene product. It is available in Asia Pacific or Europe. Primary characteristic: flame rated.&& |
| Product Description | |
|---|---|
| Generic | PS (GPPS) |
| Material Status | Commercial: Active |
| Features | V-0 |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 7.5 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.40 to 0.70 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.050 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 98 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 6.4 mm | 76.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| — | 97.0 | ℃ | ASTM D1525 1 |
| — | 88.0 | ℃ | ASTM D1525 2 |
| 1.6 mm | 50.0 | ℃ | UL 746 |
| 3.2 mm | 50.0 | ℃ | UL 746 |
| Relative temperature index | UL 746 | ||
| Electrical performance | UL 746 | ||
| Impact mechanical performance | UL 746 | ||
| 1.60 mm | 50.0 | ℃ | UL 746 |
| 3.20 mm | 50.0 | ℃ | UL 746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric constant | |||
| 1 MHz | 2.50 | ASTM D150 | |
| Arc resistance | ASTM D495 | ||
| 1.59 mm | PLC 7 | ASTM D495 | |
| 3.17 mm | PLC 7 | ASTM D495 | |
| Compared to the leakage tracing index | UL 746 | ||
| 1.59 mm | PLC 2 | UL 746 | |
| High Arc Burning Index (HAI) | UL 746 | ||
| 1.6 mm | PLC 4 | UL 746 | |
| 3.2 mm | PLC 4 | UL 746 | |
| High voltage arc marking rate | |||
| HVTR | UL 746 | ||
| 3.17 mm | PLC 2 | UL 746 | |
| Hot wire ignition | |||
| HWI | UL 746 | ||
| 3.2 mm | PLC 2 | UL 746 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.60 mm, all colors | V-0 | UL 94 | |
| 3.20 mm, all colors | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| Level L | 70 | ASTM D785 | |
| tensile strength | 29.4 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 40 | % | ASTM D638 |
| Bending modulus | 2060 | MPa | ASTM D790 |
| bending strength | 39.2 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 3. Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |