| About |
|---|
| Polyvinyl chloride made by suspension polymerisation. APPLICATIONS Sewage pipes, pressure pipes, rigid profiles, window frames, electrical ducts&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Suspended polymer |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.58 | g/cm³ | ISO 60 |
| K-Value | 67.0 | ISO 1628-2 | |
| Particle size distribution | ISO 1624 | ||
| Retained on 0.063 mm sieve | > 95 | % | ISO 1624 |
| Retained on 0.250 mm sieve | < 5.0 | % | ISO 1624 |
| Volatiles | < 0.30 | % | ISO 1269 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual Vinyl Chloride Monomer | < 1 | ppm | ISO 6401 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |