Styromer e-S0701

About
Styromer e-S0701 is a General Purpose Polystyrene product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&&

Product Description
Generic	PS (GPPS)
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	6.0 to 9.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1840	MPa	ISO 527-2/1A/50
tensile strength
Yield, 23 ℃	18.9	MPa	ISO 527-2/1A/50
Tensile strain
Fracture, 23 ℃	19	%	ISO 527-2/1A/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	6.5	kJ/m²	ISO 179/1A
Charpy Unnotch Impact strength
23℃	31	kJ/m²	ISO 179/1U

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.